:no_upscale()/BT9000-2112.jpg)
Biotech
Biotech Vacuum Pump Gen5, No PCB, Analytical, Bottom Mount
This degassing vacuum pump is a next-generation dual-stage molded pump that works with IDEX Health & Science degassing chambers and PCB control systems. The analytical scale version is designed for standard degassing chambers and fluids. The prep scale versions are designed to handle high vapor loads from high flow rate chambers or fluids with low vapor pressure that will cause increased solvent pervaporation through the membrane. The pump is available in side and bottom mount versions. The next-generation degassing vacuum pump will function with both the lumen and film degassing chambers.Näytä lisää
Tarjous
Kaikki hinnat sis. alv:n; toimituskulut kaupan syötteen mukaan. Klikkaus vie suoraan kaupan tuotesivulle.
Hintakehitys (alin hinta)
Hintahälytys
Ilmoita minulle, kun tämän tuotteen hinta laskee.
Tuotetiedot
- Merkit
- Biotech
- Kategoriat
- Liiketoiminta ja teollisuus > Tutkimus- ja laboratoriotuotteet > Laboratoriotarvikkeet
Samankaltaisia tuotteita
Sartorius SafetySpace Filter Tip, 0.5-200ul ext, Single Tray, Pre-sterilized, 10x96/PAK1 tarjousalk. 188,18 €
Orochem SPE Cartridge LRC, C8, 10 ml, 100 mg, 50/PAK1 tarjousalk. 163,62 €
Ohio Valley 0.8mm Inlet Seal, Stainless Steel, For Agilent, Split Double Groove w/SS Washers, 2/PAK1 tarjousalk. 249,43 €
Orochem SPE Cartridge Orpheus, NH2, 1000 mg, 6 ml, 30/PAK1 tarjousalk. 973,35 €
Altmann Analytik HPLC Column ReproGel Wein, 15.0 μm, 4.6 x 75 mm1 tarjousalk. 408,33 €
Chiral HPLC Column CHIRALPAK IB-3, 150 x 4,6 mm, 3 μm1 tarjousalk. 1 890,00 €