
partworks
4x Strut Mount Stop Plates for PORSCHE 996 Carrera Turbo REAR
4x Strut Mount Stop Plates for PORSCHE 996 Carrera Turbo REAR Many other suspension components in stock Description: The strut mount forms the connection between the strut and the body and is therefore also called a strut bearing. Before the strut mount can be attached to the body, the springs must usually be pre-tensioned and mounted to the shock absorber with the strut mount.A defective strut mount is noticeable by creaking or grinding noises.Due to the considerable installation effort, it is advisable to always replace the strut mounts when replacing the shock absorbers or struts, or when performing other work on the suspension.The stop plates of the strut mounts are often heavily rusted/corroded and should always be replaced as well.Here you will find high-quality replacements as described in the title.In addition to strut mounts and other suspension components, you will find many other spare parts and corresponding sets for your Porsche model in our shop. Brand Information: Partworks GmbH is a German company specializing in the reverse engineering and distribution of spare parts for Porsche. We place particular emphasis on high quality and excellent service. More than 130,000 car enthusiasts worldwide are already satisfied customers of the Paderborn-based company. As specialists in classic car spare parts, we are aware of our customers' high quality standards. Therefore, you can be confident that our reverse-engineered parts meet the exact specifications of the original and, in some cases, even exceed them. With our own engineering department and internal testing, we can guarantee the reliability of our products. Finally, our DIN ISO 9001-certified quality management system confirms the thoroughness of our work. When you see the manufacturer's name, partworks indicates either an in-house development or an original equipment manufacturer (OEM) part (OE quality). OEMs are the manufacturers who supplied the original product to the vehicle manufacturer but cannot sell it under their own brand on the open market. Reference numbers: 996.333.107.00 Scope of delivery: As shown in the illustration Suitable for: 996 996 turbo 996 GT2 GT3Näytä lisää
Tarjous
Kaikki hinnat sis. alv:n; toimituskulut kaupan syötteen mukaan. Klikkaus vie suoraan kaupan tuotesivulle.
Hintakehitys (alin hinta)
Hintahälytys
Ilmoita minulle, kun tämän tuotteen hinta laskee.
Tuotetiedot
- Merkit
- partworks
- GTIN
- 04251750577274
- Kategoriat
- Ajoneuvot ja niiden osat > Ajoneuvojen osat ja lisävarusteet > Moottoriajoneuvojen osat
Samankaltaisia tuotteita
1x Gas Spring Hood for PORSCHE 718 Boxster 981 Damper REAR1 tarjousalk. 36,98 €
1x Stabilizer Bushing 20mm for PORSCHE 911 G 3.0 SC 3.2 930 -'86 Rubber Bushing FRONT1 tarjousalk. 5,98 €
1x Brake Pad Wear Indicator for PORSCHE Cayenne 9YA PO536 with 18"/19" SEBRO FRONT1 tarjousalk. 16,99 €
Tire Pressure Adhesive Sticker for PORSCHE 911 G turbo 930 '78- Carrera '87-1 tarjousalk. 28,78 €
1x O-Ring Chain Housing Cylinder Head for PORSCHE 964 Oil Bridge 999701909401 tarjousalk. 3,98 €
Indicator lens for PORSCHE 944 S2 turbo from '86- FRONT RIGHT WHITE1 tarjousalk. 16,99 €