
partworks
2x threaded sleeve for PORSCHE 944 951 '87- 968 shock absorber strut conversion
2x threaded sleeve for PORSCHE 944 951 '87- 968 shock absorber strut conversion Made in Germany Description: Here you can get threaded sleeves for converting two standard shock absorber legs of the Porsche models 944 S2 and 968. They enable the use of Bilstein B6 shock absorbers.Procedure:1. Chisel out the compression of the old shock absorber cartridges and pull out the damper cartridges2. Shorten the tubes by 44.5mm3. Remove the zinc layer from the threaded sleeves in the welding area4. Carefully drive the threaded sleeves into the pipes and weld them well all around (Before welding, check whether the gap between the pipe and the threaded sleeve fits. The damper cartridge with the nut must be able to be tightened with 5 full turns)5. Smooth the weld seam, paint and assemble the shock absorberIn our webshop you will find a variety of other spare parts for your Porsche. Brand information: partworks GmbH is a German company that specializes in reverse engineering and the distribution of spare parts for Porsche. Particular emphasis is placed on high quality and excellent service. More than 130,000 car fans worldwide are already satisfied customers of the Paderborn-based company. As a specialist company for classic car spare parts, we are aware of the quality requirements of our customers. Therefore, when it comes to subsequent developments, you can be sure that the requirements are very close to the original and in some cases even exceed them. With our own engineering department and internal testing, we can ensure the reliability of our products. Last but not least, our DIN ISO 9001 certified quality management confirms the thoroughness of our work. If you see the manufacturer information partworks, it means either an in-house development or an item from the original manufacturer (OE quality). Original equipment manufacturers are those manufacturers who have supplied the original product to the vehicle manufacturer but cannot be active in free trade under their own brand. Reference numbers: 477412059A Scope of delivery: According to illustration Suitable for: 944 '87- 944 turbo (951) '87- 968 Vehicles with pressed Fichtel and Sachs shock absorbersNäytä lisää
Tarjous
Kaikki hinnat sis. alv:n; toimituskulut kaupan syötteen mukaan. Klikkaus vie suoraan kaupan tuotesivulle.
Hintakehitys (alin hinta)
Hintahälytys
Ilmoita minulle, kun tämän tuotteen hinta laskee.
Tuotetiedot
- Merkit
- partworks
- GTIN
- 04251750573054
- Kategoriat
- Ajoneuvot ja niiden osat > Ajoneuvojen osat ja lisävarusteet > Moottoriajoneuvojen osat
Samankaltaisia tuotteita
Contact foil for on-board computer for LAND-ROVER Range Rover III L322 Vogue MID Radio1 tarjousalk. 8,99 €
Contact foil for BMW X5 E53 MID radio display1 tarjousalk. 8,99 €
Clutch disc for PORSCHE 914 SACHS1 tarjousalk. 97,48 €
Outer sill door for PORSCHE 356 A/B/C Entry trim outer skin LEFT1 tarjousalk. 179,48 €
Contact foil for BMW 7 Series E38 MID radio display1 tarjousalk. 8,99 €
Contact foil for BMW E39 MID radio display1 tarjousalk. 8,99 €