partworks

Speedometer gears for VOLVO 240 92-93 740 760 instrument cluster V26 SET

Name: Speedometer gears for VOLVO 240 92-93 740 760 instrument cluster V26 SET
Brand: partworks

Speedometer gears for VOLVO 240 92-93 740 760 instrument cluster V26 SET Components that have been tried and tested over many years Description: If the odometer/trip meter has failed on your Volvo 240, then these gears are the cause. The reason was an assembly error by the manufacturer. The original gear was made from a urethane base but was factory greased with a petroleum-based lubricant. This lubricant has made the material porous over the years. During the replacement, you should therefore definitely clean the lubricant from the components. The material of this gear offered is mixed with graphite additives and does not require any lubricant! The attached disc gear also often fails because it has also come into contact with the wrong lubricant. Note: In some cases, different numbers of teeth are installed in the models. We therefore recommend purchasing only after dismantling the gear. Services: We have over 100 gear variants in our range and can supply the right gears if required! + all alternative sizes always in stock + fast exchange service in the event of a size discrepancy For the repair, we will send you illustrated repair instructions (German/English) by email. Quality: Our gears are elaborately and faithfully manufactured using injection molding and are not self-made 3D printed products. We work with a manufacturer that specializes in the production of plastic gears and is the global market leader with its repair solutions. The so-called involute tooth geometry is retained; this is the only way to ensure low-friction sliding of the tooth flanks between the pairs of gears. The material we use is the thermoplastic Celron with graphite additives. These ensure low friction and wear-free operation. If you disassemble the speedometer in advance, please note that the shaft of the speedometer needle is very sensitive. Grab the speedometer needle in the middle and turn it counterclockwise. Pull lightly. Friction is everything that keeps the needle on the shaft. Brand information: partworks GmbH is a German company that specializes in reverse engineering and the distribution of spare parts for Porsche. Particular emphasis is placed on high quality and excellent service. More than 130,000 car fans worldwide are already satisfied customers of the Paderborn-based company. As a specialist company for classic car spare parts, we are aware of the quality requirements of our customers. Therefore, when it comes to subsequent developments, you can be sure that the requirements are very close to the original and in some cases even exceed them. With our own engineering department and internal testing, we can ensure the reliability of our products. Last but not least, our DIN ISO 9001 certified quality management confirms the thoroughness of our work. If you see the manufacturer information partworks, it means either an in-house development or an item from the original manufacturer (OE quality). Original equipment manufacturers are those manufacturers who have supplied the original product to the vehicle manufacturer but cannot be active in free trade under their own brand. Reference numbers: 3515205 3554524 3554516 110008551011 1398724 1324215 19840316 1100084281 Scope of delivery: as pictured Suitable for: Volvo 240 years '92-'93 Volvo 700 (740,760) Vehicle with VDO speedometer In some cases, different numbers of teeth are installed in the models. We therefore recommend purchasing only after dismantling the gear.