Polymaker

Polymaker PG05002 3D printing material Black 750 g - Polymaker

Name: Polymaker PG05002 3D printing material Black 750 g - Polymaker
Brand: Polymaker

PolyMide CoPA is based on a copolymer of Nylon 6 and Nylon 6,6. The filament combines excellent strength, toughness, and heat resistance of up to 180C. Does PolyMide CoPA requires an enclosed printer? No, all our Nylon features our Warp-Free Technology which means it does not require a heated bed or heated chamber of more than 50C.PolyMide CoPA can be printed on a 30-40C bed without enclosure. Printing, Drying and Annealing Settings? Printing Temperature: 250C - 270CBed Temperature: 25C - 50CPrinting Speed: 30mm/s - 50mm/sFan: OFFDirect Drive:Retraction Distance: 3mmRetraction Speed: 50mm/sIndirect Drive:Retraction Distance: 6mmRetraction Speed: 60mm/sDrying Settings: 100C for 6h(Only if the material has absorbed moisture)Annealing Settings: 80 for 6h Do you need to anneal PolyMide CoPA? PolyMide CoPA displays outstanding mechanical and thermal properties when fully crystallized. The printed part will not reach full crystallization after the printing process, an additional step is required: Annealing.You can anneal PolyMide CoPA by placing your part in the oven at 80C for 6h. Weight & dimensions Weight: 750 g Thickness: 2.85 mm Packaging data Quantity per pack: 1 pc(s) Features Printing colours: Black Colour name: Black Hex colour code: 101820Vis mere

fra 787,78 kr.

1 tilbud

Se tilbud