Lian Li

Lian Li Lancool III Midi Tower Black, Transparent - Lian Li Lancool

Name: Lian Li Lancool III Midi Tower Black, Transparent - Lian Li Lancool
Brand: Lian Li

LANCOOL III, the premium mid-tower chassis, offers better thermal performance than LANCOOL II by including 4 pre-installed 140mm PWM fans, and featuring fine mesh panels designed to ensure ample airflow is delivered to the high-end components while the system runs at peak performance. Comes equipped with 3x 140mm ARGB PWM fans that have similar performance as the LANCOOL III RGB 140mm back PWM Fan. EXTREME AIRFLOW CRAFTMANSHIP A fine mesh design has been implemented at the front, top, and both bottom side panels of the LANCOOL III. HINGED PANELS ALL AROUND The hinged tempered glass side panels offer an unobstructed view of the interior configuration, while the bottom shroud panels provide quick access to the PSU and storage drives. The two removable 4mm tempered glass panels located on each side of the case can be opened by pulling the front aluminum handle. The mesh panels located on both sides of the PSU shroud area can be removed for cleaning when the front panel is unattached. FLEXIBLE CONFIGURATION With ample interior room, the LANCOOL III can offer different cooling and usage scenarios AIR Cooling With high airflow stock fans, and air tower clearance up to 185mm, the LANCOOL III is ideal for an air-cooling build. AIO Cooling With ample front intake, the LANCOOL III can provide strong performance for an AIO cooling build. The top fan bracket can support up to 3 x 120mm/140mm fans and offers enough thickness clearance for an AIO with a 420 radiator/fan combo. Custom Water Cooling With the ability to support 3 × 360mm radiators simultaneously, the LANCOOL III can offer custom water-cooling enthusiasts, lots of imagination. SPACIOUS COOLING SUPPORT The LANCOOL III is optimized for water-cooling and high-end thermal solutions. A maximum of 10 × 120mm fans or a large 420mm radiator can be mounted in the main chamber. Multi-way Front Fan/Radiator Bracket The multi-way front fan bracket offers 4 different ways to mount a radiator or fans to cater to different cooling needs, and features a new latch/handle mechanism to easily secure it in place without the need of the locking thumbscrews. Removable Top Fan Bracket The removable top fan bracket with offset fan mounting points allows for a thicker fan and radiator combo to be installed at the top of the LANCOOL III by providing enough clearance from the ram. Modular PSU Shroud Bracket Fan/ Pump/ SSD The adjustable modular PSU shroud bracket can accommodate 1 x 360mm radiator, 3 x 120mm fans, 3 x 2.5 SSDs, or a pump/reservoir combos. Side Multi-Purpose Mounting Slots Mounting slots beside the motherboard are provided at 105mm apart (standard 120mm fan mounting points) to allow the installation of a distro plate or a reservoir/pump bracket. EXTENSIVE STORAGE CAPACITY Multiple storage drive mounting locations are supported for up to 12 x 2.5 SSDs or 4 x 3.5 HDDs and 8 x 2.5 SSDs. COMPREHENSIVE CABLE MANAGEMENT As the second chamber located on the right side is visible, great consideration has been given to cable management. The LANCOOL III features an upgraded solution to ensure neat cable routing with toolless magnetic cable cover doors, and a well-organized layout for hubs and cables. Sliding Cable Routing Cover By slightly loosening the two back thumb screws, the cable cover can be adjusted to fit different sizes of motherboards. REVERSIBLE FRONT I/O Optimized for PC locate on a desk, the front I/O can be relocated to the bottom of the chassis. FRIENDLY PSU INSTALLATION The removable PSU mounting bracket allows for PSU installation outside of the chassis, to then slide it in through from the rear. ANTI-SAG BRACKET FOR PERFECTLY HORIZONTAL GPU A GPU anti-sag bracket is included for a seamless display of the hardware through the side tempered glass panels. Ports & interfaces USB 2.0 ports quantity: 0 USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity: 2 USB 3.2 Gen 2 (3.1 Gen 2) Type-C ports quantity: 1 USB 3.2 Gen 2 (3.1 Gen 2) Type-A ports quantity: 0 Audio input: Yes Audio output: Yes Weight & dimensions Width: 238 mm Depth: 526 mm Height: 523 mm Storage Supported HDD sizes: 2.5,3.5" HDD/SSD combo cage: Yes SSD form factor: 2.5" Cooling Front fans installed: 3x 140 mm Number of front fans supported (max): 3 Front fans diameters supported: 120,140 mm Rear fans installed: 1x 140 mm Number of rear fans supported (max): 1 Rear fans diameters supported: 120,140 mm Number of top fans